Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Toyota RAV 4 MK2.

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light bulb

See other generations:
Video tutorial

Let's see how to proceed to replace one of the rear light bulbs of the Toyota RAV 4, in case it burns out. We open the rear door of the car, remove the side panel on the side of the light that contains the bulb to be replaced, we find a closed panel with two clips, once opened we find, on the back of the light, a small door that closes the back of the light where the bulb holders are housed.

We insert our hand, rotate and remove the one with the bulb to be changed, we replace it with a new bulb of the same characteristics, insert the bulb holder and lock it and put back the two panels.


Posted on 12 May 2025 by ScegliAuto


Related tutorials

Dismantling the rear light and bulbs of the Toyota RAV 4.
Dismantling the rear light and bulbs of the Toyota RAV 4.
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this guide, we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs on the Toyota RAV 4. First, le…
Replacing the Rear Light on the Toyota RAV 4
Replacing the Rear Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today we will discover the steps to remove and replace the rear light and its bulbs on the Toyota RAV 4. First, open the rear tailgate and start remo…
How to Replace the Rear Wiper Blade on the Toyota RAV 4
How to Replace the Rear Wiper Blade on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The steps outlined in this guide will show you how to remove and replace the rear wiper blade on the Toyota RAV 4. First, move to the rear and lift t…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos