Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the rear light and bulbs of the Toyota RAV 4.

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs on the Toyota RAV 4. First, let's open the rear trunk door and start unscrewing the fastening screws located on the side of the light, disconnecting the electrical connector located behind the light in order to remove it. We then remove any faulty brake lights, replacing them with new ones (having the same fitting).

We can either replace the entire rear light, making the electrical connection and reassembling it onto the body.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

Replacing the Rear Light on the Toyota RAV 4
Replacing the Rear Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today we will discover the steps to remove and replace the rear light and its bulbs on the Toyota RAV 4. First, open the rear tailgate and start remo…
How to disassemble the rear light of the Toyota RAV 4
How to disassemble the rear light of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today's information will show us how to disassemble and replace the rear taillight and its bulbs of the Toyota RAV 4. First, we open the rear door of…
Replacement of the rear headlight bulbs of the Toyota RAV 4 MK2.
Replacement of the rear headlight bulbs of the Toyota RAV 4 MK2.
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Let's see how to proceed to replace one of the rear light bulbs of the Toyota RAV 4, in case it burns out. We open the rear door of the car, remove t…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos