Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of the Toyota RAV 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
Video tutorial

Today's information will show us how to disassemble and replace the rear taillight and its bulbs of the Toyota RAV 4. First, we open the rear door of the car and start unscrewing the fixing screws we find on the side of the taillight; we carefully remove it, disconnecting the electrical connector found on the back, as shown in the video.

At this point, if necessary, we replace only the bulbs or the entire taillight, connecting it and checking the functioning of the lights before fixing the headlight with the screws.


Posted on 16 August 2025 by ScegliAuto


Related tutorials

Dismantling the rear light and bulbs of the Toyota RAV 4.
Dismantling the rear light and bulbs of the Toyota RAV 4.
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this guide, we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs on the Toyota RAV 4. First, le…
Replacing the Rear Light on the Toyota RAV 4
Replacing the Rear Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today we will discover the steps to remove and replace the rear light and its bulbs on the Toyota RAV 4. First, open the rear tailgate and start remo…
How to disassemble the internal ceiling of the Toyota RAV 4 roof
How to disassemble the internal ceiling of the Toyota RAV 4 roof
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today's main steps will show us how to disassemble and replace the headliner or interior roof lining of the Toyota RAV 4. First, we get on board the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos