Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the headlight on Toyota Rva 4

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Headlight

Let's see how to remove the headlight on Toyota Rva 4. We open the bonnet by pulling the lever located at the bottom right of the dashboard, we secure it all the same. We unscrew the locking pins of the headlight (plastic rivets) with a screwdriver. After removing the front bumper, we extract the headlight from its seat. We will find the bulbs with metal hooks, take out the lamp holders from the headlight and go to extract the damaged bulb with the help of a screwdriver. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. Finally we mount the new lighthouse and proceed backwards.


Posted on 18 October 2023 by ScegliAuto



Toyota Rav 4 headlight replacement
Toyota Rav 4 (2000-2006 / Xa20, MK 2) We see the replacement of the headlight on a Toyota Rav 4. We lift the front hood of the car, let's put it in safety. We remove the central grille an
How do you replace the front headlight of the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In order to replace the front headlight of the Toyota RAV 4, you need to open the hood so that you can loosen the seven screws that secure the upper
Toyota Rav4 headlight bulb replacement
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Replacing the headlight bulbs on a Toyota Rav 4? We disassemble and replace the bulbs. We open the engine compartment hood and remove the plastic cov

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos