Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rav 4
  6. : Accessory Kit

Toyota Rav 4 - Accessory Kit

Toyota Rav 4 (2006-2013 / Xa30, MK 3)
How to install the rear view camera of the Toyota Rav 4

To start you can proceed with removing the rear hatch panel of the trunk because it will be necessary to pass cables, to do so you can follow a guide that you …read all…
Posted on 28 September 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
How to install the rear view camera to the Toyota Rav 4

As a first step it will be necessary to remove the rear hatch panel of the trunk, to do so you can follow a guide that you will find on our chosen site. Com. …read all…
Posted on 28 September 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
LED interior lights replacement

Replacing the bulbs that illuminate the passenger compartment with LED ones will give the car a much more modern and captivating appearance, significantly …read all…
Posted on 26 August 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
LED interior lighting installation

Installing a LED light package on your car will give it a more modern and captivating look as well as improve its brightness in general; many manufacturers …read all…
Posted on 21 August 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
Bluetooth extension installation

This video shows us how to install a bluetooth extension on our car. Once the relative panels have been removed to access the car radio extraction, we also …read all…
Posted on 26 July 2023 by ScegliAuto
Toyota Rav 4 (2000-2006 / Xa20, MK 2)
Aux input adapter installation

In order to install an adapter for an auxiliary input on the original car radio, the car radio itself must be removed. Start by unhooking the plastic covers on …read all…
Posted on 26 July 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
Installation of car devices (Iphone, Ipod, AUX, Mp3)

To perform this operation it is necessary to have a good dexterity and a good dose of experience. First of all, the car radio must be removed. On the front …read all…
Posted on 25 July 2023 by ScegliAuto

Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (1) Car stereo (10) Anti roll bar (2) Roof Rack Bars (2) Battery (27) Air Vents (1) Arm (1) Gearbox (3) Spark plugs (6) Glow plugs (1) Bodywork (1) Glove box (6) Key (25) Timing belt (16) V-belt (1) Air conditioning (1) Air conditioning controls (1) -board computer (22) Checks and maintenance (113) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Spacers (1) Rear bench seat (2) Headlight (13) Tail light (11) Fog lights (5) Air filter (15) Cabin air filter (19) Petrol filter (2) Diesel filter (5) Oil filter (4) Clutch (1) Injectors (1) Window lift switch (1) Accessory Kit (7) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (15) Rear light bulb (7) Interior lights ceiling light bulb (7) Antifreeze liquid (3) Dashboard light (2) License plate light (3) Third brake light (1) Handle (3) Engine (2) Window motor (1) Starter motor (6) Gear oil (3) Engine oil (15) Door panel (16) Front bumper (4) Rear bumper (6) Brake pads (9) Tires (7) Gear Shift Knob (8) Fuel pump (14) Door (3) Instrument cluster (22) Radiator (1) Passenger compartment heating radiator (1) Wheel (5) Fuse box (27) Seat (8) Lock (3) Lambda sensor (1) Suspensions (2) Outside rearview mirror (7) Windscreen wipers (13) Transmission (3) Windshield washer nozzle (1) Valve (2) EGR valve (4) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos