Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Lights with LED

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

Replace the bulbs that illuminate the cabin with LED ones to give the car a much more modern and appealing look, significantly improving the cabin lighting; start with the front dome light near the rear-view mirror by removing the clear cover to access the bulb (T10 fitting): if the bulb does not light up, rotate it 180 degrees to respect the power polarity; move on to the vanity lights under the sun visor and the rear dome light; continue with the boot light and then the number plate light, finishing with the reverse lights.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Installing LED Interior Lights
Installing LED Interior Lights
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Installing a LED light package in your car will give it a more modern and appealing look, as well as generally improve its brightness; many manufactu…
Bulb Replacement and LED Light Installation
Bulb Replacement and LED Light Installation
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace a faulty bulb or to install LED bulbs, first remove the plastic panel near the bonnet catch. There are two types of clips to release. Some…
Replacing the Interior Cabin Lights on a Toyota Rav4 MK3
Replacing the Interior Cabin Lights on a Toyota Rav4 MK3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this short video, we will understand the instructions for removing and replacing the interior cabin lights on the third generation Toyota Rav4. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos