Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Interior Lights

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

Installing a LED light package in your car will give it a more modern and appealing look, as well as generally improve its brightness; many manufacturers already offer specific conversion kits that include all the necessary bulbs for this upgrade. Start with the interior light near the rear-view mirror by unclipping just the plastic cover; move on to the courtesy lights under the sun visor by removing the entire lamp holder; continue with the central interior light, the lights in the boot, the reverse lights, and the rear lights by removing the plastic caps from the inner lining of the boot lid.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Bulb Replacement and LED Light Installation
Bulb Replacement and LED Light Installation
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace a faulty bulb or to install LED bulbs, first remove the plastic panel near the bonnet catch. There are two types of clips to release. Some…
Installing Interior Handle Lighting on Toyota RAV4 [USA]
Installing Interior Handle Lighting on Toyota RAV4 [USA]
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Enhancing the interior of your car with an ambient light kit will make it look much more modern and appealing. You can purchase specific aftermarket …
Replacing Cabin Lights with LED
Replacing Cabin Lights with LED
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Replace the bulbs that illuminate the cabin with LED ones to give the car a much more modern and appealing look, significantly improving the cabin li…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos