Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Cabin Lights on a Toyota Rav4 MK3

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
Video tutorial

In this short video, we will understand the instructions for removing and replacing the interior cabin lights on the third generation Toyota Rav4. First, get inside the vehicle and use something thin, like a plastic lever, to remove the two parts of the light fittings, as shown in the video; then remove the bulb-type bulbs found inside, replacing them with new ones (of the correct type).

Now, reinsert the light fitting until it clicks into place; apply the same procedure for the other interior and courtesy lights!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing Interior Lights on Toyota Rav4
Replacing Interior Lights on Toyota Rav4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Get into the car and use a plastic lever to remove the front light fittings that protect the bulbs. Work slowly during this operation, gradually inse…
How to Replace the Interior Light Bulbs in a Toyota RAV4?
How to Replace the Interior Light Bulbs in a Toyota RAV4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this tutorial, you will learn how to replace the interior light bulbs in a Toyota RAV4, a very simple and quick task. First, ensure that the key i…
Replacing Cabin Lights with LED
Replacing Cabin Lights with LED
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Replace the bulbs that illuminate the cabin with LED ones to give the car a much more modern and appealing look, significantly improving the cabin li…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos