Do it yourself
| ||||
|
Toyota Rav 4 - Video tutorial
Model: Toyota Rav 4
Xa50, MK 5
- Years 2019-2024 Get in the car and use a plastic lever to remove the front ceiling lights that protect the bulbs. Work slowly in this operation by inserting more and more the lever into the slot of the ceiling light, until removing them. Simply remove the bulbs from their housing and insert the new ones you purchased. Nothing easier! Reassemble the ceiling lights by hand, making sure they are properly locked into place. The operation is practically the same also for the rear ceiling light: when you operate with the lever insert the same in the front slot of the ceiling light.
Posted on 21 January 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |