Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Rear Camera on the Toyota Rav 4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Accessory kit

To start, remove the rear tailgate panel as you will need to run some cables through it; you can follow a guide available on our website scegliauto.com. Now, remove the number plate light unit to install the device that includes the camera itself. You will need to run the camera cable to the point where you have installed the display. Now you can also install the display and connect the cable to test your newly installed camera, and you're done!

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today's instructions will show you how to install the rear camera useful for parking manoeuvres on the Toyota RAV4. First, get into the vehicle and b…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) First, remove the rear tailgate panel. You can follow a guide available on our website. Next, disconnect the number plate light to install the unit t…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The fuse boxes installed in the Toyota RAV 4 contain the fuses that regulate the operation of the devices present in the car: you will find two boxes…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos