Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Side Bars on the Toyota Rav 4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026

In this brief and simple guide, follow the steps to install the side bars on the Toyota Rav 4. First, lift the vehicle and remove the plastic clips found in the mounting area for the side bars. Next, install the new supports onto the side bar mounting points, as shown in the video. Once the bracket is mounted, attach the side step securely using the appropriate bolts, following the video tutorial to the end!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Rails on a Toyota RAV 4?
How to Install Roof Rails on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To install the roof rails on the Toyota RAV 4, first open the guide caps located on the roof using a flat screwdriver. You will need to remove the bo…
How to disassemble the glove compartment and the pollen filter of the Toyota RAV4
How to disassemble the glove compartment and the pollen filter of the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The following instructions will show us the steps to disassemble and replace the glove box and pollen filter of the Toyota RAV4. First, we get into t…
Fitting Universal Roof Bars on a Toyota Rav 4
Fitting Universal Roof Bars on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to fit universal roof bars on a Toyota Rav 4. Universal roof bars are used on cars with and without roof rails (fixed bars secured to t…

    Frequently Asked Questions

    • Rav 4 2019-2026 - What to do if the tailgate does not open on the Toyota Rav4? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos