Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Roof Rails on a Toyota RAV 4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Roof rack bars

To install the roof rails on the Toyota RAV 4, first open the guide caps located on the roof using a flat screwdriver. You will need to remove the bolt found under the cover to insert the pin that will act as a support for the rail. This operation must be performed for all holes on the roof. At this point, position the rails, aligning their upper holes with the previously installed pins. The rails should then be secured by inserting the corresponding bolts.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to fit universal roof bars on a Toyota Rav 4. Universal roof bars are used on cars with and without roof rails (fixed bars secured to t…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today's instructions will show us how to disassemble and replace the front seats of the Toyota RAV 4, following these simple steps. First, we open th…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today's main steps will show us how to disassemble and replace the headliner or interior roof lining of the Toyota RAV 4. First, we get on board the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos