|
Do it yourself
| |||
| ||||
How to Install the Rear Camera on a Toyota RAV4
Model: Toyota Rav 4
MK 3, Xa30
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
Today's instructions will show you how to install the rear camera useful for parking manoeuvres on the Toyota RAV4. First, get into the vehicle and begin by installing the new display in the centre of the dashboard, consequently removing the original radio; then run the wiring along the side of the cabin, behind the pillars, and install the camera on the tailgate or number plate, as illustrated in the video. At this point, make the various electrical connections, then check the operation of the rear camera!
Updated on 5 September 2026 by ScegliAuto
Related tutorials
Toyota Rav 4
(2006-2013 /
MK 3, Xa30)
First, remove the rear tailgate panel. You can follow a guide available on our website. Next, disconnect the number plate light to install the unit t…
Toyota Rav 4
(2006-2013 /
MK 3, Xa30)
To start, remove the rear tailgate panel as you will need to run some cables through it; you can follow a guide available on our website scegliauto.c…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
In this brief and simple guide, follow the steps to install the side bars on the Toyota Rav 4. First, lift the vehicle and remove the plastic clips f…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |