Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of the Hyundai I10

Model: Hyundai I10 AI3, AC3 - Years 2019-2026
Part:

The tire pressure sensor on the instrument panel of your third generation Hyundai I10 warns you when there is a puncture or when the tires have been inflated to the wrong pressure. If it lights up by mistake, you can manually reset it by following these steps. Once the instrument panel is on, press the directional button located on the right side of the steering wheel and locate the display screen related to tire pressures. Finally, hold down the "OK" button for a few seconds and select the "Set" option to complete the reset of the sensor.

Posted on 1 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure light on the Hyundai I10?
How to reset the tyre pressure light on the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To reset the tyre pressure light on the Hyundai I10, first inflate the tyres to the correct pressure value: this value is indicated on the sticker at…
How to Reset the Tyre Pressure Light on the Hyundai I10
How to Reset the Tyre Pressure Light on the Hyundai I10
Hyundai I10 (2019-2026 / AI3, AC3) Today, we will learn how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai I10. Before resetting, ensure all four tyres are at…
How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos