Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure light on the Hyundai I10?

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Tire pressure warning light

To reset the tyre pressure light on the Hyundai I10, first inflate the tyres to the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once all the tyres are inflated, turn the ignition key to switch on the instrument cluster: this allows the sensors to read the new tyre pressure values. After a few seconds, you will notice that the tyre pressure light will turn off automatically.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Hyundai I10?
How do you reset the tire pressure warning light on the Hyundai I10?
Hyundai I10 (2019-2026 / AI3, AC3) It will be possible to make the tire pressure warning light on the Hyundai I10 completely disappear from the instrument panel by first inflating the …
How to Reset the Tyre Pressure Light on the Hyundai I10
How to Reset the Tyre Pressure Light on the Hyundai I10
Hyundai I10 (2019-2026 / AI3, AC3) Today, we will learn how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai I10. Before resetting, ensure all four tyres are at…
How do you reset the tire pressure light on the Hyundai i10?
Hyundai I10 (2019-2026 / AI3, AC3) To make the tire pressure warning light disappear from the instrument panel of the Hyundai I10, you need to inflate the tires until they reach the re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos