Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rav 4
  6. : Interior blower

Toyota Rav 4 - Interior blower

Toyota Rav 4 (2000-2006 / Xa20, MK 2)
Where is the cabin fan fuse located in the Toyota RAV4?

If the cabin fan of our Toyota RAV4 suddenly stopped working, the first thing we can do is check the condition of the respective fuse, whose location is …read all…
Posted on 30 November 2023 by ScegliAuto
Toyota Rav 4 (2013-2018 / Xa40, MK 4)
How to replace the cabin fan in the Toyota RAV4?

In this tutorial, we can see how to replace the cabin fan in the Toyota RAV4, a very simple and quick operation. First of all, make sure that the key is not …read all…
Posted on 24 November 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
How do I replace the passenger compartment fan of the Toyota RAV 4?

In order to replace the passenger compartment fan of the Toyota RAV 4 it is necessary to remove the fixing clips that block the protection panel placed …read all…
Posted on 20 September 2022 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
Toyota Rav 4 MK3 cabin blower replacement

In this short video we will see the instructions on how to disassemble and replace the passenger compartment fan motor of the Toyota Rav 4 third series. First …read all…
Posted on 22 November 2022 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
How to remove the radiator of a Toyota Rav4

Before we can start, we will have to go and open the front hood of our Toyota Rav4. Let's start by removing the upper radiator cover, unscrewing the fixing …read all…
Posted on 22 January 2024 by ScegliAuto

Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (1) Car stereo (10) Anti roll bar (2) Roof Rack Bars (2) Battery (27) Air Vents (1) Arm (1) Gearbox (3) Spark plugs (6) Glow plugs (1) Bodywork (1) Glove box (6) Key (25) Timing belt (16) V-belt (1) Air conditioning (1) Air conditioning controls (1) -board computer (22) Checks and maintenance (113) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Spacers (1) Rear bench seat (2) Headlight (13) Tail light (11) Fog lights (5) Air filter (15) Cabin air filter (19) Petrol filter (2) Diesel filter (5) Oil filter (4) Clutch (1) Injectors (1) Window lift switch (1) Accessory Kit (7) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (15) Rear light bulb (7) Interior lights ceiling light bulb (7) Antifreeze liquid (3) Dashboard light (2) License plate light (3) Third brake light (1) Handle (3) Engine (2) Window motor (1) Starter motor (6) Gear oil (3) Engine oil (15) Door panel (16) Front bumper (4) Rear bumper (6) Brake pads (9) Tires (7) Gear Shift Knob (8) Fuel pump (14) Door (3) Instrument cluster (22) Radiator (1) Passenger compartment heating radiator (1) Wheel (5) Fuse box (27) Seat (8) Lock (3) Lambda sensor (1) Suspensions (2) Outside rearview mirror (7) Windscreen wipers (13) Transmission (3) Windshield washer nozzle (1) Valve (2) EGR valve (4) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos