Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Toyota RAV4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Blower motor

In this tutorial, you will see how to replace the cabin fan in a Toyota RAV4, a very simple and quick operation. First, ensure that the key is not inserted, then go to the passenger side and open the glove compartment. Next, detach the drawer from the dashboard, locate the fan, and unscrew the three fixing bolts using a standard cross-head screwdriver. At this point, you can remove the fan from the housing, disconnect the power connector, and install the replacement by following the exact reverse procedure.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Cabin Fan Fuse Located in the Toyota RAV4?
Where is the Cabin Fan Fuse Located in the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) If the cabin fan of your Toyota RAV4 has suddenly stopped working, the first thing to do is check the status of the respective fuse, the location of …
How to reset the service light on the Toyota RAV4?
How to reset the service light on the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this tutorial we can see how to reset the service in the Toyota RAV4, an extremely simple and quick operation, to be carried out only once all sch…
Where is the fuel pump located in a Toyota RAV4?
Where is the fuel pump located in a Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this video, you can see where the fuel pump is located in the Toyota RAV4 and how to proceed if you need to replace it. As shown, the pump is situ…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos