Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel of the Toyota RAV4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Instrument cluster

Thanks to the procedure described in this new guide, you will be able to dismantle the instrument panel of your Toyota RAV4 (latest model) in a few minutes and in total safety. First of all, go inside the cabin and make sure the car is turned off, then straighten the steering wheel and proceed with the removal of the plastics around the panel. Once this is done, unscrew the screws holding the panel in place and pull it towards you. Finally, disconnect the electrical cables located in the rear area to complete the removal of the instrument panel of your Toyota RAV4.

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) If you own a fourth-generation Toyota RAV4 (2013-2018) and want to learn how to manually reset the tyre pressure warning light, simply follow the ste…
How to Reset the Maintenance Light on the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this new mini guide dedicated to your new Toyota RAV4 fifth generation (2019-2023), you will discover the steps to manually reset the maintenance …
How to disassemble the tailgate panel in the Toyota RAV4?
How to disassemble the tailgate panel in the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this tutorial we can see how to disassemble the tailgate panel in the Toyota RAV4, an extremely simple and quick operation. First of all, we open …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos