Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Instrument Cluster from Toyota Rav4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Instrument cluster

In this video, you will learn how to remove the instrument cluster from a second-generation Toyota Rav4 by following these simple steps. First, get inside the vehicle and remove the plastic covering the instrument cluster by unclipping it from the rear clips; then, unscrew the fixing screws located on the sides. At this point, you can pull and extract the instrument cluster, disconnecting all the electrical connectors located at the back; finally, refit everything by reversing the disassembly procedure and following the video until the end!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light on your Toyota RAV4 fourth generation (2013-2018), follow these simple steps. First, enter the cabin and tur…
How to reset the Service light on a Toyota Rav4?
How to reset the Service light on a Toyota Rav4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To reset the Service light on a Toyota Rav4, turn on the ignition by double-clicking the appropriate button to the right of the steering wheel. Then,…
How to Reset the Maintenance Light on a Toyota RAV4 from the Instrument Panel
How to Reset the Maintenance Light on a Toyota RAV4 from the Instrument Panel
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the maintenance light on the Toyota RAV4, turn on the instrument panel without starting the engine and wait for the maintenance warning to a…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos