Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2007 Toyota RAV4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset the maintenance light on your 2007 Toyota RAV4. To reset the light, first start the instrument cluster and ensure it is set to TRIP A. Then, turn off the instrument cluster, press and hold the button while starting the instrument cluster again.

Wait for the light to stop flashing; this indicates that the reset has occurred, and you can release the button.

It is advisable to perform the reset only after servicing your Toyota RAV4. This procedure is very simple and takes little time to complete.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Toyota RAV4 from the Instrument Panel
How to Reset the Maintenance Light on a Toyota RAV4 from the Instrument Panel
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the maintenance light on the Toyota RAV4, turn on the instrument panel without starting the engine and wait for the maintenance warning to a…
How to Reset the Maintenance Light on the Toyota RAV4?
How to Reset the Maintenance Light on the Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this video, you can see how to reset the maintenance light on the Toyota RAV4, a very simple and quick operation. First, turn on the ignition and,…
How to Reset the Maintenance Light on a 2018 Toyota RAV4
How to Reset the Maintenance Light on a 2018 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you own a 2018 Toyota RAV4 and want to know the steps to correctly reset the maintenance light, follow the instructions provided. First, turn on t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos