Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Toyota RAV4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Warning light – error code

In this video, you can see how to reset the maintenance light on the Toyota RAV4, a very simple and quick operation. First, turn on the ignition and, using the DISP button located on the right side of the steering wheel, set the display to TRIP A. Next, turn off the ignition, hold down the same button, and turn it back on again. At this point, keep the button pressed for about 10 seconds, or until the maintenance light goes out completely. Finally, start the vehicle and check that the procedure has been completed correctly.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on the 2019 Toyota RAV4
How to reset the maintenance light on the 2019 Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The maintenance light on the instrument panel of your 2019 Toyota RAV4 turns off automatically once you complete the service, but if this does not ha…
How to reset maintenance light on 2007 Toyota RAV4
How to reset maintenance light on 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This video shows how to reset the maintenance light on your 2007 Toyota RAV4. To reset the light, first start the instrument panel and make sure it i…
How to Reset the Maintenance Light on the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this new mini guide dedicated to your new Toyota RAV4 fifth generation (2019-2023), you will discover the steps to manually reset the maintenance …

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos