Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Toyota RAV4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Warning light – error code

To reset the Oil Service light on the Toyota RAV4, press and hold the button located on the left side of the instrument panel while it is off. Continue holding the button while inserting the key into the ignition switch, allowing you to turn the key: this will turn on the instrument panel, and after a few seconds, the Service light will be completely reset. After the reset, you can turn off and turn on the instrument panel to ensure everything is functioning correctly.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil change on a 2015 Toyota RAV4
How to reset the oil change on a 2015 Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Through this very short video guide today, you can see the procedure necessary to reset the maintenance light related to the engine oil change on a T…
How to Reset the Oil Light of the 2023 Toyota RAV4
How to Reset the Oil Light of the 2023 Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) If you want to know how to manually reset the oil light of your new 2023 Toyota RAV4, follow these steps. First, turn on the ignition and press the m…
How to reset the oil change on a 2014 Toyota RAV4
How to reset the oil change on a 2014 Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Through this very useful tutorial today, you will be able to see the necessary procedure to reset the engine oil change light on a 2014 Toyota RAV4. …

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos