Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change on a 2014 Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Checks and maintenance

Through this very useful tutorial today, you will be able to see the necessary procedure to reset the engine oil change light on a 2014 Toyota RAV4. Let's start by turning on the vehicle's dashboard and pressing the "DISP" button until the "TRIP A" screen appears on the speedometer display. Then, turn off the dashboard and press and hold the "DISP" button before turning on the vehicle's ignition without starting the engine. Finally, continue to hold down the previous button until the procedure is completed as shown in the video.

Posted on 27 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light of the 2023 Toyota RAV4
How to Reset the Oil Light of the 2023 Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) If you want to know how to manually reset the oil light of your new 2023 Toyota RAV4, follow these steps. First, turn on the ignition and press the m…
How to Reset the Service Light on the Toyota RAV4
How to Reset the Service Light on the Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Briefly, here are the instructions to reset the maintenance light for the oil change on the Toyota RAV4. First, get inside the vehicle and press and …
How to Reset the Oil Change Light on a Toyota RAV4?
How to Reset the Oil Change Light on a Toyota RAV4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To reset the Oil Service light on the Toyota RAV4, press and hold the button located on the left side of the instrument panel while it is off. Contin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos