Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota RAV4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Briefly, here are the instructions to reset the maintenance light for the oil change on the Toyota RAV4. First, get inside the vehicle and press and hold the small button located on the left side of the instrument cluster; then turn the key to position one to power up the dashboard and wait for the service light to reset, as shown in the video.

At this point, turn off the dashboard and start the engine, checking that the oil light reset procedure has been successful!


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Toyota Rav4?
How to reset the "Service" light on a Toyota Rav4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the "Service" light on a Toyota Rav4, start by turning on the instrument panel without starting the engine. Use the buttons on the steering …
How to Reset the "Service" Light on a Toyota RAV4
How to Reset the "Service" Light on a Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the "Service" light on a Toyota RAV4, turn on the ignition without starting the engine. Use the buttons on the steering wheel to navigate to…
How to reset the Service light on a Toyota Rav4?
How to reset the Service light on a Toyota Rav4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To reset the Service light on a Toyota Rav4, turn on the ignition by double-clicking the appropriate button to the right of the steering wheel. Then,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos