Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a Toyota RAV 4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan on a Toyota RAV 4, detach the retaining clips that secure the protection panel located just below the glove compartment. Once this panel is removed, you will have access to the screws securing the fan from underneath.

By unscrewing these screws, you can extract the fan from its housing and disconnect the connectors attached to it. This will allow you to connect the new fan to the relevant wires and insert it back into its position. Finally, secure it with screws and reinstall the appropriate plastic panel.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan on a Toyota Rav 4 MK3
Replacing the Cabin Fan on a Toyota Rav 4 MK3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this short video, we will see the instructions on how to dismantle and replace the cabin fan motor on the Toyota Rav 4 third series. First, get in…
How to Replace the Cabin Fan in a Toyota RAV4?
How to Replace the Cabin Fan in a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, you will see how to replace the cabin fan in a Toyota RAV4, a very simple and quick operation. First, ensure that the key is not in…
How to Replace the Radiator on a Toyota Rav 4
How to Replace the Radiator on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In today's tutorial video, you will see the main instructions to remove and replace the radiator on a Toyota Rav 4. First, lift the vehicle and remov…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos