Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Toyota Rav 4 -

Toyota Rav 4 (2000-2006 / mk 2, xa 20)

Toyota Rav 4 (2000-2006 / MK 2, Xa20)
How to Replace the Brake Light Bulbs on a Toyota RAV4?
In this tutorial, you will learn how to replace the brake light bulbs on a Toyota RAV4. For this simple and quick task, you will not need any special tools, …Read all…
Posted on 28 August 2026 by ScegliAuto
Airbag (4) Alternator (6) Speaker (1) Shocks (1) Antenna (2) Car stereo (9) Anti-roll bar (3) Roof rack bars (4) Battery (29) Ignition coil (1) Air vents (1) Control arm (1) Transmission (3) Spark plugs (7) Glow plugs (2) Body (8) Glove compartment (8) Key (53) Trunk lock (1) Timing belt (25) V-belt (4) Air conditioner (1) Onboard computer (16) Checks and maintenance (89) Throttle body (1) Dashboard (2) Bearing (3) Brake rotors (2) Wheel spacers (1) Rear bench seat (4) Headlight (16) Tail light (15) Fog lights (6) Air filter (20) Cabin air filter (20) Fuel filter (2) Diesel fuel filter (10) Oil filter (6) Clutch (9) Fuel injectors (3) Window switch (1) Accessory kit (7) Light bulb (8) Side marker bulb (2) Headlight bulb (22) Tail light bulb (11) Interior dome light bulb (10) Antifreeze coolant (3) Instrument panel light (2) License plate light (4) (1) Handle (3) Engine (3) Power window motor (2) Starter motor (7) Transmission fluid (4) Engine oil (14) Clock (35) Door trim panel (18) Front bumper (7) Rear bumper (8) Brake pads (9) Tires (2) Shift knob (8) Pump (1) Fuel pump (16) Car door (2) Instrument cluster (9) Radiator (3) Heater core (1) Wheel (6) Fuse box (49) Seat (13) Parking sensors (3) Door lock (3) Oxygen sensor (1) Suspension system (2) Side mirror (12) Rearview mirror (2) Warning light – error code (39) Tire pressure warning light (96) Service warning light (161) Fuel cap (8) Windshield wipers (15) Drivetrain (4) Windshield washer nozzle (1) Valve (2) EGR valve (5) Blower motor (5) Steering wheel (5)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos