Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment on a 2003 Toyota Rav 4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Glove compartment

See other generations:
Video tutorial

The glove compartment on a 2003 Toyota Rav 4 is very easy to remove and only requires a cross-head screwdriver. First, open the glove compartment and then tilt it. This can be done by applying slight pressure on the sides to release the catches.

Once tilted, you can see the two screws holding it in place. Unscrew them with the cross-head screwdriver, and you have successfully removed the glove compartment! This procedure applies to all Toyota Rav 4 vehicles produced from 2000 to 2006 and can also be adapted for very similar vehicle models.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Open the Glove Compartment of the Toyota RAV 4
How to Open the Glove Compartment of the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Follow these steps to open and close the main and auxiliary glove compartments of the Toyota RAV 4. First, get into the vehicle and pull the glove co…
How to Remove the Glove Compartment of a Toyota Rav 4
How to Remove the Glove Compartment of a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) How to remove the glove compartment of a Toyota Rav 4? Open the glove compartment and unclip the end arms of the compartment, then use a screwdriver …
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following instructions will show you the steps to remove and replace the glove box and cabin filter of the Toyota RAV 4. First, get inside the ve…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos