Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glove Compartment Damper of the Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Glove compartment

See other generations:
Video tutorial

Today's guide will show you the main steps to remove and replace the glove compartment damper of the Toyota RAV 4. First, get into the cabin and start by opening the glove compartment; then detach the damper found at the bottom right of the glove compartment, first detaching it from the bottom and then from the top, as illustrated in the video.

At this point, install the new glove compartment damper, securing it correctly, following the video tutorial to the end!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Toyota RAV4
How to Replace the Cabin Air Filter in a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To replace the cabin air filter in a Toyota RAV4, open the glove compartment on the passenger side and remove its contents. Detach the small side dam…
How to Remove the Glove Compartment of a Toyota Rav 4
How to Remove the Glove Compartment of a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) How to remove the glove compartment of a Toyota Rav 4? Open the glove compartment and unclip the end arms of the compartment, then use a screwdriver …
How to Remove the Glove Compartment on a 2003 Toyota Rav 4?
How to Remove the Glove Compartment on a 2003 Toyota Rav 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) The glove compartment on a 2003 Toyota Rav 4 is very easy to remove and only requires a cross-head screwdriver. First, open the glove compartment and…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos