Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Air Filter in a Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter in a Toyota RAV4, open the glove compartment on the passenger side and remove its contents. Detach the small side damper connected to the glove compartment, then press inward on the two side walls to release the catches and lower the compartment completely.

Behind the glove compartment, you will find the cover of the filter housing. Press the fastening tabs and remove it, then slide out the old pollen filter.

Clean the inside of the housing from any leaves or debris and insert the new element, respecting the UP indication or the flow direction marked on the filter. Reattach the cover, lift the glove compartment back up until the side catches engage, and reconnect the damper.


Posted on 7 September 2026 by ScegliAuto


Related tutorials

Toyota Rav 4 (2006-2013 / Xa30, MK 3) As shown in this tutorial, replacing the cabin air filter in the Toyota RAV4 is a very simple and quick task. The filter is located behind the glove …
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, you will see how to replace the cabin filter on a Toyota RAV4, a very simple and quick operation. First, position yourself in the p…
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Replacing the cabin air filter in the Toyota RAV4 is a very simple and quick operation; this tutorial shows how to proceed. First, since it is locate…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos