Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to replace the cabin filter in Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Cabin air filter
Operation: How to replace the cabin filter in Toyota RAV4?

As we can see in this tutorial, replacing the cabin air filter in the Toyota RAV4 is a very simple and quick operation. The filter is positioned behind the glove compartment on the passenger side, therefore the drawer must first be removed. We can do this by disengaging the shock absorber on the right and pressing the two corners inwards. Once this is done, open the rectangular filter door unlocking the side clip, extract the old filter and insert the spare, taking care to position it in the right direction. Finally, we reassemble the door and the drawer.


Posted on 8 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Rav 4 2000-2006 - Where is the antipoline filter on the 2003 Toyota Rav 4? Read Answer
    • Rav 4 2000-2006 - Where is the Toyota RAV 4 cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos