Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Cabin air filter

Replacing the cabin filter on a Toyota RAV4 is a very simple and quick operation; let's see how to proceed in this tutorial. Start by sitting in the passenger seat, then open the glove compartment, empty it, and disconnect the end stop damper located on the right side. Next, press both sides inward, unclip the drawer from the dashboard, and open the long rectangular door by unlocking the right clip. At this point, you can remove the old filter, clean the inside of the housing from any debris, and insert the replacement in the correct orientation.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in the Toyota RAV4?
How to Replace the Cabin Filter in the Toyota RAV4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) As shown in this tutorial, replacing the cabin air filter in the Toyota RAV4 is a very simple and quick task. The filter is located behind the glove …
How to Replace the Cabin Filter on a Toyota RAV4?
How to Replace the Cabin Filter on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) .. In this tutorial, you will see how to replace the cabin filter on a Toyota RAV4, a very simple and quick operation. First, position.. …
How to Replace the Cabin Filter in the Toyota RAV4?
How to Replace the Cabin Filter in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Replacing the cabin air filter in the Toyota RAV4 is a very simple and quick operation; this tutorial shows how to proceed. First, since it is locate…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos