Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter from a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

In this video, see how to remove the cabin filter from a Toyota Rav 4. Open the glove compartment and unclip the plastic guides (located at the sides of the drawer), rotate the glove compartment forward and remove it. Pull off the cover plate and slide out the air filter from its housing (as shown in the video).

Once done, insert the new air filter into the filter holder (ensure the filter is inserted correctly without bending it). Finally, close the container and reassemble the glove compartment, securing it with the guides.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box and Replace the Cabin Filter on the Toyota RAV4
How to Remove the Glove Box and Replace the Cabin Filter on the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this guide, you will find instructions that will allow you to remove and replace the glove box, subsequently replacing the cabin filter, on the To…
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following instructions will show you the steps to remove and replace the glove box and cabin filter of the Toyota RAV 4. First, get inside the ve…
Replacing the Pollen Filter in a Toyota Rav 4
Replacing the Pollen Filter in a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The video shows how to replace the pollen filter in a Toyota Rav 4 3 (XA30). This is a very simple operation that can be done in a short time. Open t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos