Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter in a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

The video shows how to replace the pollen filter in a Toyota Rav 4 3 (XA30). This is a very simple operation that can be done in a short time. Open the glove compartment and disconnect the retaining cable from the glove box. Press the retaining brakes.

Remove the cover of the box and then pull out the filter. It is recommended not to clean and reuse the same filter.

Install the new filter in the correct direction in the mounting seat. Replace the cover of the filter box. Finally, reassemble the glove compartment using the same steps as during disassembly.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Toyota RAV4 III
Replacing the Cabin Air Filter on a Toyota RAV4 III
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This video demonstrates how the periodic replacement of the filter mounted on the air intake of the climate control system ensures that dirt and dust…
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following steps will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D. First, we open the hood of the c…
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following instructions will show you the steps to remove and replace the glove box and cabin filter of the Toyota RAV 4. First, get inside the ve…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos