Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the throttle body on the Toyota RAV 4 VVT-I

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Throttle body

See other generations:
Video tutorial

In today's video tutorial, you will learn how to remove and replace the throttle body on the Toyota RAV 4 VVT-I, following the instructions provided below. First, open the bonnet and start by removing the upper engine cover; then disconnect the intake hose from the air filter box to the throttle body by unscrewing the clamp screw.

Once the air filter box is removed, you can unscrew the screws of the throttle body; disconnect the electrical connector of the throttle position sensor to remove it, cleaning or replacing it as necessary!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I
Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below we will see the instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4 2.0 VVT-I. First, we open t…
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The instructions in this guide will show us how to disassemble and replace the alternator of the Toyota RAV 4 2.0 VVT-I. First, let's open the vehicl…
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Today's main steps will show you how to remove and replace the clutch on the Toyota RAV 4 2.0 VVT-I. First, open the bonnet of the vehicle and start …

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos