Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the starter motor located in the Toyota RAV4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

In this video, you can see where the starter motor is located in the Toyota RAV4 and how to proceed if you need to replace it. As shown, the motor is positioned on the left side of the engine, about halfway up and just below the air filter housing. To replace it, simply remove the battery, its support, the air filter housing, and the intake duct, then disconnect the two power terminals and unscrew the mounting bolts.

Before starting, ensure that the key is not inserted to operate safely.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Where is the Starter Motor Fuse in a Toyota RAV4?
Where is the Starter Motor Fuse in a Toyota RAV4?
Toyota Rav 4 (1994-2000 / Xa10, MK 1) If the starter motor of your Toyota RAV4 suddenly stops working, first check the status of the respective fuse, the location of which is indicated in…
Removing the Starter Motor on a Toyota Rav4
Removing the Starter Motor on a Toyota Rav4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Here’s how to remove the starter motor on a Toyota Rav4. Open the bonnet and secure it. First, disconnect the battery cables using a socket wrench. R…
Replacing Starter Motor on Toyota RAV4
Replacing Starter Motor on Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video tutorial, we will see the main instructions for disassembling and replacing the starter motor on a third-generation Toyota RAV4. First,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos