Do it yourself
Frequently asked questions about cars and motorcycles

Removing the starter motor on a Toyota Rav4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Starter motor

Let's see how to remove the starter motor on a Toyota Rav4. Let's open the bonnet of the car, let's secure it. To begin with, with a socket wrench we disconnect the cables of the car battery power supply. We remove the ventilation kit so that we can disassemble the motor, we unscrew the locking pins of the starter motor, we disconnect the terminals of the motor power supply with a pliers or screwdriver depending on the pressure of the tabs. We detach the piece from its seat and remove the same from the engine compartment. Finally: we assemble the new ignition motor with the connection of the power supply cables and with the attached tightening screws.


Posted on 10 October 2023 by ScegliAuto



Where is the starter motor located in the Toyota RAV4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video we can see where the starter motor is located in the Toyota RAV4 and how to proceed in case we need to replace it. As shown, the starte
How to replace the starter motor of the 2006 Toyota RAV4 Diesel
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In today's article, we will explain how to replace the starter motor of a 2006 Toyota RAV4. For this operation, you will need a flathead screwdriver,
Toyota Rav4 starter motor replacement
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video tutorial we will see the main instructions to be able to disassemble and replace the starter motor on a Toyota RAV 4 third series. Firs

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos