Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Starter Motor Fuse in a Toyota RAV4?

Model: Toyota Rav 4 MK 1, Xa10 - Years 1994-2000
Part: Starter motor

If the starter motor of your Toyota RAV4 suddenly stops working, first check the status of the respective fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, on the driver's side, and is labelled F18. In the same box, you can also find the starter relay, another element to check in case of malfunction, which is labelled R3. If the fuse or relay is faulty, ensure to use replacements with the same specifications.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor on a Toyota Rav4
Removing the Starter Motor on a Toyota Rav4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Here’s how to remove the starter motor on a Toyota Rav4. Open the bonnet and secure it. First, disconnect the battery cables using a socket wrench. R…
Where is the fuel pump fuse located in the Toyota RAV4?
Where is the fuel pump fuse located in the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) If the fuel pump in your Toyota RAV4 has suddenly stopped working, the first thing to do is check the status of the corresponding fuse, the location …
Where is the Fuel Filter Located in the Toyota RAV4 and How to Replace It?
Where is the Fuel Filter Located in the Toyota RAV4 and How to Replace It?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) This video shows where the fuel filter is located in the Toyota RAV4 and how to proceed if you need to replace it. As shown, it is located inside the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos