Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel pump fuse located in the Toyota RAV4?

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Fuel pump

If the fuel pump in your Toyota RAV4 has suddenly stopped working, the first thing to do is check the status of the corresponding fuse, the location of which is shown in this video. As demonstrated, the fuse is located in the box inside the engine compartment, protected by the black plastic cover on the driver's side. It is a 20A fuse and is the fourth in the first row when looking at the box from the front. If the fuse is blown, ensure you replace it with a spare of equivalent specifications and always work with the vehicle turned off to avoid damaging the pump.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the internal lights fuse in the Toyota RAV4?
Where is the internal lights fuse in the Toyota RAV4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) If the internal lights in your Toyota RAV4 suddenly stop working and the respective bulbs are in good condition, it is likely that the related fuse h…
Where is the Cabin Fan Fuse Located in the Toyota RAV4?
Where is the Cabin Fan Fuse Located in the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) If the cabin fan of your Toyota RAV4 has suddenly stopped working, the first thing to do is check the status of the respective fuse, the location of …
Where is the Starter Motor Fuse in a Toyota RAV4?
Where is the Starter Motor Fuse in a Toyota RAV4?
Toyota Rav 4 (1994-2000 / MK 1, Xa10) If the starter motor of your Toyota RAV4 suddenly stops working, first check the status of the respective fuse, the location of which is indicated in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos