Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : Where is the fuel pump located in the Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Fuel pump
Operation: Where is the fuel pump located in the Toyota RAV4?

In this video, we can see where the fuel pump is located in the Toyota RAV4 and how to proceed in case we need to replace it. As shown, the pump is located inside the cabin, specifically below the rear seat cushion. To access it, simply activate the indicated lever, fold down the seats completely, and lift the carpet. Once this is done, we can open the circular cap, disconnect both the power connector and the fuel hose, and unscrew the large outer ring. To install the replacement, just follow the reverse procedure.


Posted on 14 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2013-2018 - What is the position of the fuel pump on the Toyota Rav4? Read Answer
    • Rav 4 2019-2026 - I have problems with the fuel pump of my Toyota Rav 4, how much could it cost me? Read Answer
    • Rav 4 2000-2006 - Where is the Toyota RAV 4 float located? Read Answer
    • Rav 4 2000-2006 - How to remove the diesel pump of the 2003 Toyota Rav 4? Read Answer
    • Rav 4 2000-2006 - How much does it cost to repair the 2003 Toyota Rav4 diesel injection pump? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos