Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the fuel pump in the Toyota RAV4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you can see how to replace the fuel pump in the Toyota RAV4, a very simple operation. First, ensure that the key is not inserted to operate safely, then lower the left rear seatback and fold it completely.

Next, lift the carpet, open the large cap, and disconnect both the power connector and the fuel hose. At this point, you can unscrew all the bolts around the perimeter of the pump, remove it from the tank, and fit the replacement by following the reverse procedure.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide provides the necessary instructions to remove and replace the fuel pump of the Toyota RAV4. To access the fuel pump, it will be necessary …
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below we will see the instructions that will allow us to disassemble and replace the fuel pump of the Toyota RAV 4 fuel tank. First, we open the rear…
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this video, you can see where the fuel pump is located in the Toyota RAV4 and how to proceed if you need to replace it. As shown, the pump is situ…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos