Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Toyota Rav-4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

In today's video, you will learn how to replace the air filter on the third-generation Toyota Rav-4. First, make sure the engine is cold to avoid unpleasant burns. Open the bonnet and locate the air filter cover.

Release the fastening clips and remove the cover. Once done, you can extract the old air filter and replace it with a new unit of the same type.

It is advisable to clean the installation area before reinserting the new unit.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on Toyota Rav 4
How to Remove the Air Filter on Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Remove the worn air filter on a Toyota Rav 4. Replace the part located inside the engine bay. Open the car door, pull up the bonnet release lever loc…
Replacement of the diesel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the diesel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today's video will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D, in simple and quick steps. First, we o…
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following steps will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D. First, we open the hood of the c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos