Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Today, you will see the steps to remove the car radio from a second-generation Toyota Yaris. First, get inside the car and remove the side trims and the one on the instrument panel by prying with a thin tool; then, remove the air vents and unscrew all the fixing screws underneath.

At this point, slide out the radio and disconnect the electrical connectors at the back, along with the antenna cable; for reassembly, simply apply the reverse procedure of disassembly!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Replacing the Radio in a Toyota Yaris
Replacing the Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…
Removing the Car Radio from a Toyota Yaris 1
Removing the Car Radio from a Toyota Yaris 1
Toyota Yaris (1999-2005 / Xp10) In this video, see the instructions for removing the original car radio from a first series Toyota Yaris, following these simple steps. First, get in…
Removing the Radio Block from a Toyota Yaris
Removing the Radio Block from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Want to remove the radio from the Yaris? Let's look at disassembling the components of the Toyota. Remove the plastic trim on the sides of the radio …

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos