Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio antenna of the Toyota Camry

Model: Toyota Camry Xv70 - Years 2018-2024
Part: Antenna

These short and simple steps will show us how to disassemble and replace the car radio antenna of the Toyota Camry. First, we open the rear hatch of the trunk and start disassembling the roof lining or headliner on the back; this way we will have access to the antenna mounting nut, which we will unscrew with a socket wrench, as shown in the video. At this point, we remove the antenna from the outside, replacing it with the new one; we properly secure it on the roof of the car, securing the nut internally and finally reassembling the headliner!

Posted on 13 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Calibrate and Reset the Toyota Camry Radio
How to Calibrate and Reset the Toyota Camry Radio
Toyota Camry (2018-2024 / Xv70) In this brief guide, follow the instructions to calibrate and reset the factory radio of the Toyota Camry. First, get in the vehicle and turn on the …
How to remove the car radio from the Toyota Camry 2009
How to remove the car radio from the Toyota Camry 2009
Toyota Camry (2006-2013 / Xv40) If you own a 2009 Toyota Camry and are planning to remove the factory radio by yourself, then all you have to do is carefully read and follow the fol…
How to disassemble the stock radio of the Toyota Camry
How to disassemble the stock radio of the Toyota Camry
Toyota Camry (2018-2024 / Xv70) Today we will discover the instructions that will allow us to disassemble and replace the original radio of the Toyota Camry, in simple steps. First,…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos