Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the radio antenna of the Toyota RAV4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Antenna

The following steps will show us how to disassemble and replace the car radio antenna of the Toyota RAV 4. To remove the antenna along with its base, it is necessary to detach the car ceiling on the rear side; then unscrew the antenna fixing nut, disconnecting the electrical connector, as shown in the video. At this point, we remove the antenna from the outside, replacing it if necessary with a new one; we reassemble and connect the radio antenna, then reassemble the internal roof lining. All that's left is to check the radio stations' functionality!

Posted on 13 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the antenna of the Toyota RAV 4
How to replace the antenna of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this guide we will see the instructions that will allow us to disassemble and replace the antenna of the Toyota RAV 4 car radio. First, we open th…
Removing the Radio from a Toyota Rav4
Removing the Radio from a Toyota Rav4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To remove the original radio from the dashboard of a Toyota Rav4 for replacement with a more updated model, use a thin lever, preferably plastic to a…
Replacement of the rear taillight of the Toyota RAV 4
Replacement of the rear taillight of the Toyota RAV 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today we will discover the steps that will allow us to disassemble and replace the rear taillight and its bulbs of the Toyota RAV 4. First, we open t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos