Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the third brake light of the Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part:

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the lights and the third brake light of the Toyota Corolla. First of all, let's move to the rear of the car and start by opening the trunk door; then we remove the plastic interior lining to access the inside of the brake light, as shown in the video.

At this point, we remove the third brake light bulb, replacing it with the new one (of the correct type and with the same connection); we reassemble and connect the brake light, checking the operation of all the stop lights!


Posted on 15 May 2025 by ScegliAuto


Related tutorials

Removing Third Brake Light on Toyota Corolla
Removing Third Brake Light on Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) In this video tutorial, we will see how to remove the third brake light/centre stop light on a Toyota Corolla. First, open the boot and press the tab…
Replacing the rear light bulbs of the Toyota Corolla
Replacing the rear light bulbs of the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Here are the instructions for removing and replacing the rear light bulbs of the Toyota Corolla. First, open the boot lid and start removing the side…
Replacing the Rear Light of a Toyota Corolla
Replacing the Rear Light of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In these brief and simple steps, you will learn how to dismantle and replace the rear light and its bulbs on a Toyota Corolla. First, open the boot a…

How to Reset the TPMS Light on the 2014 Toyota Yaris

Resetting the TPMS light, which relates to tyre pressure, is a simple and quick task that can be done independently on the 2014 Toyota Yaris. To reset the light, turn on the ignition and press the RESET button located under the dashboard on the driver's side. While holding the button down, you can access the reset function and wait a few seconds before releasing the button. Once the ignition is restarted, the light will turn off. If the light does not reset, you may need to perform the reset using a scanner and OBD port at a garage.

Watch the video!


by ScegliAuto

More videos