Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light Bulbs on a Toyota Corolla?

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Light bulb

In this tutorial, you will see how to replace the boot light bulbs on a Toyota Corolla, a very simple and quick operation. First, ensure that the key is not inserted, then using a plastic spatula to avoid leaving any marks, pry the light out by leveraging along the side gap. Once the light is removed from the wall, disconnect the power connector by unlocking the clip, separate the outer cover, and proceed with replacing the bulb. Finally, follow the reverse procedure to reassemble everything.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulb on a Toyota Corolla
How to Replace the Number Plate Bulb on a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the number plate bulb on a Toyota Corolla, open the boot to access the internal rivets. Remove these rivets to shift the carpet, allowing …
How to Change the Rear Light on a Toyota Corolla
How to Change the Rear Light on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) How do you remove the rear light on a Toyota Corolla? To remove the rear light, you first need to take off the cover in the boot. Lift the tailgate a…
How to Replace the Rear Light Bulb of the Toyota Corolla?
How to Replace the Rear Light Bulb of the Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) To replace the rear light bulb of the Toyota Corolla, you need to detach the two pins located inside the boot, accessible by opening the rear hatch. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos