Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Corolla
  6. : Light bulb

Toyota Corolla - Light bulb

Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to replace the trunk light bulbs in the Toyota Corolla?

In this tutorial, we can see how to replace the bulbs of the trunk lights in the Toyota Corolla, an extremely simple and quick operation. First of all, make …read all…
Posted on 12 May 2023 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How to replace the trunk light bulb of the Toyota Corolla.

Below we will see the instructions that will allow us to disassemble and replace the light bulb in the luggage compartment of the Toyota Corolla. First, we …read all…
Posted on 10 May 2023 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
How to replace the brake light bulbs in a Toyota Corolla.

In today's video, we will see how to replace the rear stop light bulbs in the Toyota Corolla. First, we need to get a replacement bulb, following the …read all…
Posted on 20 April 2023 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How to replace the Toyota Corolla front bulb

In today's video you will see how to replace the headlight bulb in the Toyota Corolla. Remove the sealing cap and then extract the protective plastic cover. We …read all…
Posted on 2 May 2023 by ScegliAuto
Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to replace the Toyota Corolla rear light bulb?

In order to replace the Toyota Corolla rear light bulb you have to unhook the two pins located in the inside of the trunk, accessible by opening the tailgate. …read all…
Posted on 15 August 2022 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How do you replace the Toyota Corolla headlight bulb?

In order to replace the Toyota Corolla headlight bulb, you need to open the bonnet to remove the screws and rivets from the corresponding headlight. Once these …read all…
Posted on 19 November 2022 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How to replace the Toyota Corolla headlight?

In order to replace the Toyota Corolla headlight bulb, you need to open the hood to access the engine and grab the connector connected to the bulb at the rear …read all…
Posted on 17 March 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Toyota Corolla third stop removal

In this video tutorial we will see how to remove the third stop / central stop of a Toyota Corolla. So, first of all, we open the tailgate of the trunk and we …read all…
Posted on 19 December 2023 by ScegliAuto

Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos