Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Corolla
  6. : Dashboard

Toyota Corolla - Dashboard

Toyota Corolla (2006-2013 / MK 3)
How to reset the TPMS light on the Toyota Corolla 3

In this new guide dedicated to all of you who own a Toyota Corolla Mk3, we will describe step by step all the various steps to follow if you want to correctly …read all…
Posted on 3 April 2024 by ScegliAuto
Toyota Corolla (2013-2019 / MK 4, E170, E160)
How to reset the tire pressure warning light on a 2016 Toyota Corolla.

To correctly reset the tire warning light that appears on the instrument panel of your 2016 Toyota Corolla, simply follow these simple steps. First, start the …read all…
Posted on 29 October 2023 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
How do you disassemble the Toyota Corolla dashboard?

In order to disassemble the Toyota Corolla dashboard, you must first open the glove box on the passenger side, so that the latter is completely removed from …read all…
Posted on 11 April 2023 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
Replacing the central dashboard bulbs on Toyota Corolla

First, remove the two plastic strips on the sides and bottom of the central dashboard, as shown in the video (if you struggle by hand, use a plastic wedge). …read all…
Posted on 20 February 2024 by ScegliAuto

Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos