Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Ignition coil

Toyota Corolla - Ignition coil

Ignition Coil Toyota Corolla (2013-2019 / e 160, e 170, mk 4)

Toyota Corolla (2013-2019 / E160, E170, MK 4)
Replacing the Ignition Coil in a 2010 Toyota Corolla
The video shows how to replace ignition coils 1 and 2 in a 2010 Toyota Corolla in a few simple steps. This operation can be done independently. You will notice …Read all…
Posted on 3 August 2026 by ScegliAuto
Cigarette lighter (6) Airbag (4) Alternator (2) Speaker (1) Antenna (3) Car stereo (10) Battery (24) Ignition coil (1) Grille (1) Transmission (5) Spark plugs (1) Glow plugs (1) Body (8) Glove compartment (4) Control unit (1) Key (48) Trunk lock (1) Timing belt (9) V-belt (4) Air conditioner (3) A/C controls (2) Onboard computer (6) Checks and maintenance (52) Dashboard (4) Bearing (2) Brake rotors (1) Rear bench seat (4) Headlight (11) Tail light (6) Fog lights (5) Air filter (10) Cabin air filter (14) Fuel filter (2) Diesel fuel filter (4) Parking brake (2) Clutch (1) Fuel injectors (4) Window switch (1) Xenon headlight kit (1) Light bulb (8) Side marker bulb (2) Headlight bulb (14) Tail light bulb (15) Interior dome light bulb (7) Antifreeze coolant (2) License plate light (5) (1) Handle (6) Engine (1) Power window motor (1) Starter motor (8) Transmission fluid (1) Brake fluid (1) Engine oil (7) Clock (44) Door trim panel (8) Front bumper (11) Rear bumper (3) Brake pads (4) Shift knob (10) Pump (2) Fuel pump (18) Car door (1) Push button (1) Power window switch (1) Instrument cluster (6) Radiator (1) Wheel (1) Fuse box (129) Seat (24) Parking sensors (2) Door lock (6) Side mirror (11) Warning light – error code (39) (1) Tire pressure warning light (87) Service warning light (127) Manufacturer emblem (1) Fuel cap (11) Windshield wipers (6) Thermostat (2) EGR valve (1) Blower motor (5) Side window (4) Steering wheel (2)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos