Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Timing belt

Toyota Corolla - Timing belt

Toyota Corolla (2006-2013 / MK 3)
How do you replace the timing chain of the Toyota Corolla?
In order to replace the timing chain of the Toyota Corolla, you need to loosen the screws that secure the engine block's protective cover, located on the left …read all…
Posted on 12 December 2023 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Guide to disassembling the VVT-i timing chain of the Toyota Corolla.
In this short guide, we will see the main steps that will allow us to disassemble and replace the timing chain of the Toyota Corolla. To access the timing …read all…
Posted on 28 August 2023 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How to perform engine timing on a Toyota Corolla.
Let's see the main useful information to perform the timing and replacement of the timing belt of the Toyota Corolla. In this case, the operation of …read all…
Posted on 11 May 2023 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How do you replace the timing belt on a Toyota Corolla?
In order to replace the timing belt on the Toyota Corolla, you need to open the hood, so that you can access the components located on the left side of the …read all…
Posted on 18 April 2023 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How and when to replace the timing chain on the Toyota Corolla VVT-I
Let's see in this guide when and how to change the timing chain on the second series Toyota Corolla, with VVT-I engine. Generally, for this type of engine, the …read all…
Posted on 24 February 2024 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
Toyota Corolla VVT-i 16V timing chain replacement
In today's video we will see the main instructions to be able to disassemble and replace the timing chain on a Toyota Corolla VVT-i 16 valve. First of all we …read all…
Posted on 5 January 2024 by ScegliAuto
Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos